Ceiling Light Test/Replacement

1.Turn the light switch OFF.

2.Carefully pry off the lens (A) with a small screwdriver.

CEILING LIGHT: 8 W 

 

3.Remove the two mounting screws.

4.Disconnect the 3P connector (B) from the housing (C).

5.Check for continuity between the terminals.

  • There should be continuity between the No. 1 and No. 2 terminals with the switch in the DOOR position.
  • With sunshade: There should be continuity between the No. 2 and No. 3 terminals with the switch in the ON position.
  • Without sunshade: There should be continuity between the No. 2 terminal and metallic part of the light.

6.Install in the reverse order of removal.