| 1. | Lower the door glass fully. |
| 2. | By hand, carefully release the clip, lift the cover upward to release the hook (A, B), if equipped with a tweeter, disconnect the connector (C) and remove the mirror mount cover (D) in the sequence shown.
|
| 3. | Remove the front door panel. |
| 4. | Disconnect the connector (A), then detach the harness clip (B) and remove the door wire harness (C).
|
| 5. | While holding the mirror (A), remove the nuts securing the mirror.
|
| 6. | While holding the mirror, pull the connector (B) out through the hole from inside the vehicle, then remove the mirror. Take care not to scratch the door. |
| 7. | Install the mirror in the reverse order of removal, and make sure the connector is plugged in properly. |