| 1. | Gently pull out the pivot cover (A) to release the hook (B), then remove the pivot cover.
|
| 2. | Using a 17 mm socket wrench, remove the pivot bolts (A), then remove the wave washer (B), washer (C), and nylon washer (D). Remove the stopper screw (E).
|
| 3. | Remove the pivot shaft (A) from the bushing (B) on the right, then remove the armrest (C).
|
| 4. | If necessary, remove the bushing (A).
|
| 5. | Install the armrest in the reverse order of removal. Replace the bushing if it is damaged or stress-whitened. |