Windshield Wiper Arm/Nozzle Adjustment

Wiper arms stop position


1.When the wiper arms stop at automatic stop position, confirm the wiper arms are at the standard position.

a: Position at about 24.8 mm (1.0 in.) from the top of cowl cover (A) 
b: Position at about 91 mm (3.6 in.) from the top of cowl cover (A) 


Washer nozzle position


2.When you jet the washer fluid, confirm 50 % or more of the jet fluid splashes down within the slash area. If there are not standard positions, adjust the nozzles.

c: Position at about 370 mm (14.5 in.) from the top of black ceramic (B) at lower windshield 
d: Position at about 370 mm (14.5 in.) from the top of black ceramic (B) at lower windshield 
e: Position at about 158 mm (6.2 in.) from the windshield center line (C)