| DTC B2375: | Infrared ray Error |
| 1. | Clear the DTCs with the HDS. |
| 2. | Turn the ignition switch OFF, and then back ON (II). |
| 3. | Check for DTCs with the HDS. Is DTC B2375 indicated? YES - Go to 4. NO - Intermittent failure, the system is OK at this time.n |
| 4. | Check for loose or poor connection at the automatic lighting/rain sensor 5P connector. Is connection OK? YES - Go to 5. NO - Repair the loose or poor connection.n |
| 5. | Check damage of the connector and a garbage bite of the terminal. Are damage of the connector and a garbage bite of terminal OK? YES - Go to 6. NO - Repair the damage and wash the garbage bite.n |
| 6. | Check dirt and damage of windshield. Are there any dirt and damage of the windshield? YES - Faulty automatic lighting/rain sensor.n NO - Remove the dirt and/or repair damage of windshield.n |