| DTC B1160: | Gauge Control Module Lost Communication with the MICU (DRLOCKSW Message) |
| 1. | Clear the DTCs with the HDS. |
| 2. | Turn the ignition switch OFF, and then back ON (II). |
| 3. | Wait for 6 seconds or more. |
| 4. | Check for DTCs with the HDS. Is DTC B1160 indicated? YES - Go to 5. NO - Intermittent failure. The gauge control module (tach) is OK at this time.n |
| 5. | Check for DTCs with the HDS. Are all of DTCs B1160 and B1905 also indicated at the same time? YES - Faulty MICU; replace the under-dash fuse/relay box.n |