| 1. | Disconnect the negative cable from the battery, then disconnect the positive cable. |
| 2. | Remove the drive belt. |
| 3. | Disconnect the alternator connector (A), BLK wire (B) from the alternator.
|
| 4. | Remove the harness connector (C) and harness clamps (D) from the alternator. |
| 5. | Remove the alternator.
|
| 1. | Install the alternator.
|
| 2. | Connect the alternator connector (A), BLK wire (B) to the alternator.
|
| 3. | Install the harness connector (C) and harness clamps (D) to the alternator. |
| 4. | Install the drive belt. |
| 5. | Connect the positive cable to the battery first, then the negative cable. |
| 6. | Set the clock. |
| 7. | Do the power window control unit reset procedure. |