| 1. | If the engine is out of the vehicle, Go to 10. |
| 2. | Remove the drive belt. |
| 3. | Remove the alternator. |
| 4. | Remove the A/C compressor without disconnecting A/C line. |
| 5. | Remove the engine undercover.
|
| 6. | Drain the engine oil. |
| 7. | Loosen the bands (A) securing the turbocharger outlet hose and intercooler intake hose, and remove the intercooler intake hose (B), then remove the intercooler intake pipe mounting bolts (C).
|
| 8. | Remove the intercooler intake pipe bracket (D), then remove the intercooler intake pipe (E). |
| 9. | Remove the lower torque rod.
|
| 10. | Remove the bracket stiffener (A), then remove the lower torque rod bracket (B).
|
| 11. | Remove the oil level sensor cover (A), then disconnect the oil level sensor connector (B).
|
| 12. | Remove the two bolts (C) securing the harness holder. |
| 13. | Remove the engine oil pressure switch. |
| 14. | Remove the dipstick. |
| 15. | Remove the dipstick tube.
|
| 16. | Remove the A/C compressor bracket. |
| 17. | Remove the transmission mounting bolts.
|
| 18. | Remove the bolts securing the oil pan. |
| 19. | Using a flat blade screwdriver, separate the oil pan from the lower block in the places shown.
|
| 20. | Inspect the oil pump chain. |